- 21-11-24Een goede cloud heeft een kundige dirigent nodig
- 17-10-24ECOFED wint ICT Innovatieprijs Regio Foodvalley 2024
- 01-08-24BIT geeft kaarten weg voor F1 in Zandvoort
- 24-04-24Status.bit.nl in nieuw jasje!
- 12-04-24Nieuw bij BIT: GPU hosting
- 25-03-24BIT breidt netwerkconnectiviteit uit met aansluiting op NL-ix^2
- 13-03-24No More Leaks: Samenwerken tegen cybercriminaliteit
- 03-03-24Geen verandering twee jaar na invoering sancties tegen Russische media: FOIC roept (wederom) op tot einde van ondemocratische censuur
- 29-01-24Onzichtbare upgrades
- 16-01-24BIT's Wido Potters wint Felipe Rodriquez Award voor inzet voor privacy
Maintenance UPS-sets BIT-2C
29-05-2024 00:00:00
- 29-05-2024 07:00:00
Urgency: Planned
Affected services: Equipment in BIT-2C
Expected impact: Possible loss of power redundancy
Customer intervention required: No
Reference number: 190649
Summary:
On Wednesday, May 29th, between 00:00 and 07:00 hrs, our supplier will perform maintenance on our UPS sets BIT-2C. During this maintenance, at least one power feed will remain continuously available.
Details:
For this maintenance, the UPS systems will be put in bypass mode one by one. This is not expected to cause any interruption in the power supply on the feed that is being maintained. However, it is possible that the ATS in your rack (if applicable) may switch to the other feed. If you have received warnings from BIT that your total power consumption is close to the limit, it is advisable to take action before this maintenance.
If during this maintenance the feed of the relevant UPS set is interrupted, which we do not expect, then the other feed will be available as normal. We once again recommend that you check that all your equipment is connected to both feeds.
Update placed at 29/05/2024, 04:05
This maintenance was completed succesfully at 03:45 hrs. If you have any questions regarding this maintenance, please contact the Customer Care department by phone on +31 (0)318 648 688 or by email on support@bit.nl.
Affected services: Equipment in BIT-2C
Expected impact: Possible loss of power redundancy
Customer intervention required: No
Reference number: 190649
Summary:
On Wednesday, May 29th, between 00:00 and 07:00 hrs, our supplier will perform maintenance on our UPS sets BIT-2C. During this maintenance, at least one power feed will remain continuously available.
Details:
For this maintenance, the UPS systems will be put in bypass mode one by one. This is not expected to cause any interruption in the power supply on the feed that is being maintained. However, it is possible that the ATS in your rack (if applicable) may switch to the other feed. If you have received warnings from BIT that your total power consumption is close to the limit, it is advisable to take action before this maintenance.
If during this maintenance the feed of the relevant UPS set is interrupted, which we do not expect, then the other feed will be available as normal. We once again recommend that you check that all your equipment is connected to both feeds.
Update placed at 29/05/2024, 04:05
This maintenance was completed succesfully at 03:45 hrs. If you have any questions regarding this maintenance, please contact the Customer Care department by phone on +31 (0)318 648 688 or by email on support@bit.nl.